Results 1 to 7 of 7

Thread: camera not show in apex fusion

  1. #1
    Regular Vistor
    Join Date
    Jun 2014
    Location
    St. Petersburg, FL.
    Posts
    35

    camera not show in apex fusion

    Hello, I've lost the video feed after a power surge. I restarted apex but still no video feed. Any suggestions?

  2. #2
    Aquaphile
    Join Date
    Apr 2018
    Location
    California, USA
    Posts
    70
    When that happened to me the camera IP address changed so I had to go into Fusion and edit my media with the new IP address.

  3. #3
    Regular Vistor
    Join Date
    Jun 2014
    Location
    St. Petersburg, FL.
    Posts
    35
    thanks for the reply, how do I find the camera IP address?

  4. #4
    Aquaphile
    Join Date
    Apr 2018
    Location
    California, USA
    Posts
    70
    That is a little more complicated, I think, but others here might be able to give you a quick answer, and if you search this forum there might even be an answer.

    For my Apex media cameras I use IP Webcam app on a Fire HD 7's and it shows the IP address on the bottom of the display. On my security IP Cameras I go to my Router WiFi network map(Netgear Genie) and find the IP address there.

    Hopefully someone else will post an easier way for you.

  5. #5
    Frequent Visitor rkpetersen's Avatar
    Join Date
    Jun 2017
    Location
    Near Seattle
    Posts
    940
    Quote Originally Posted by gtrange View Post
    thanks for the reply, how do I find the camera IP address?
    Open your router interface either in a web browser page or a dedicated app. Look for a page titled 'Network Map', 'Attached Devices' or similar. It will list everything on your network. The given names of the devices don't always tell you clearly what they are, but you should be able to figure out which one is the camera. You can change the IP address in the media tile to the correct one, and it will work until it changes again (another power failure, router reboot, etc. ) The way to keep that from happening is to either give your camera a static IP address (sometimes possible from within the camera's settings) and/or tell the router to always give that camera the same IP address (from within the router settings, usually called Address Reservation or similar.)

  6. #6
    Regular Vistor
    Join Date
    Jun 2014
    Location
    St. Petersburg, FL.
    Posts
    35
    thanks so much, that worked

  7. #7
    Frequent Visitor rkpetersen's Avatar
    Join Date
    Jun 2017
    Location
    Near Seattle
    Posts
    940

Similar Threads

  1. DDR dosent show in apex fusion?
    By charliedenmark in forum DŌS & DDR – Dosing and Fluid Metering System
    Replies: 2
    Last Post: 02-18-2021, 09:51
  2. I just upgraded to the new software on the apex and now my camera image doesn’t show?
    By jaybretzke in forum A2 Apex/ApexEL and A3 Apex Pro/Apex/Apex Jr
    Replies: 5
    Last Post: 12-31-2018, 10:53
  3. Apex Fusion & Display Show 0.0 Power use
    By drevnock in forum APEX Fusion
    Replies: 0
    Last Post: 08-29-2016, 05:31
  4. Help! No outlets show up in apex fusion
    By kmfoks in forum EnergyBars 832 / 632 / 8 / 6 / 4
    Replies: 7
    Last Post: 08-19-2016, 13:28
  5. How to get orp to show on apex fusion
    By byenemies in forum APEX Fusion
    Replies: 1
    Last Post: 03-15-2015, 16:02

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •