Newbie help w Kessil 160we, four daisy linked

[2019Guppy]

New to the world of Neptune so Ive got a lot to learn. Retired so please be patient, this is all my first. Feel green as Bacopa Caroliniana

anyone running the Apex, looking for some programs for some modules. Have Kessil Tuna Sun 160WE and would like to get morning to night program. Any help or suggestions would be appreciated

[zombie]

Are you using the variable speed cable to the Kessil? If so, just draw what you want to happen on the graph.

Sent from my SM-G965U using Tapatalk

[2019Guppy]

yes I am using the cables, the color temp controls dont seem to be changing the color. if correct the show to be from 10 to 100 basically. But you can click on 20 and 80 and see no color difference.

[zombie]

You are using the kessil cable correct that has one ethernet looking plug connected to one 1/8" stereo plug correct?

Sent from my SM-G965U using Tapatalk

[2019Guppy]

out of last of the 4 Kessils, two wires and one power cord come out the mounting arm. One wire is the daisy link to the other and the the other is the ethernet.

[zombie]

Post pictures of where everything is plugged into and a screenshot of the varspd you are trying to control.

Sent from my SM-G965U using Tapatalk

[2019Guppy]

dont know how to screen shot, sorry senior citizen, put here are two pic
20180828_162209.jpg20180828_162239.jpg

[zombie]

Are you programming varspd1 and varspd2, or varspd3 and varspd4? You have it plugged into 3 and 4.

Sent from my SM-G965U using Tapatalk

[2019Guppy]

Color on 3 intensity on 4

Sent from my SAMSUNG-SM-G930A using Tapatalk

[zombie]

You should be seeing a change assuming the jack is in all the way. I'm not certain, but I recall intensity being 1/3 and color being 2/4. Play around with the jack and see if you can get a response from manual ON/OFF commands.

Sent from my SM-G965U using Tapatalk

[2019Guppy]

both programs are essentially the same, so i dont think it would matter if i switched jack around.

Please explain On and OFF commands, I have not got there yet

[zombie]

both programs are essentially the same, so i dont think it would matter if i switched jack around.

Please explain On and OFF commands, I have not got there yet

Manual ON/OFF means the sliders on the dashboard.

Sent from my SM-G965U using Tapatalk

[2019Guppy]

here is brightness program Fallback OFFtdata 10:00:00,0,0,0,0,0,0,0,0,0,0,0,0,0
tdata 12:00:00,0,0,50,0,0,0,0,0,0,0,0,0,0
tdata 13:30:00,0,0,100,0,0,0,0,0,0,0,0,0,0
tdata 16:30:00,0,0,100,0,0,0,0,0,0,0,0,0,0
tdata 17:30:00,0,0,40,0,0,0,0,0,0,0,0,0,0
tdata 20:00:00,0,0,10,0,0,0,0,0,0,0,0,0,0

- - - Updated - - -

here is intensity program Fallback OFFtdata 06:00:00,0,0,3,0,0,0,0,0,0,0,0,0,0
tdata 08:00:00,0,0,17,0,0,0,0,0,0,0,0,0,0
tdata 09:00:00,0,0,45,0,0,0,0,0,0,0,0,0,0
tdata 10:00:00,0,0,70,0,0,0,0,0,0,0,0,0,0
tdata 11:00:00,0,0,90,0,0,0,0,0,0,0,0,0,0
tdata 12:00:00,0,0,100,0,0,0,0,0,0,0,0,0,0
tdata 14:00:00,0,0,100,0,0,0,0,0,0,0,0,0,0
tdata 15:00:00,0,0,90,0,0,0,0,0,0,0,0,0,0
tdata 16:00:00,0,0,70,0,0,0,0,0,0,0,0,0,0
tdata 17:00:00,0,0,45,0,0,0,0,0,0,0,0,0,0
tdata 18:00:00,0,0,17,0,0,0,0,0,0,0,0,0,0
tdata 20:00:00,0,0,3,0,0,0,0,0,0,0,0,0,0

[2019Guppy]

Ok just went from on to off with slider 4-14 , Intensity goes on and off. next turned on intensity and went from on to off with slider 3-13 for color, no visible change in color.

[zombie]

Ok just went from on to off with slider 4-14 , Intensity goes on and off. next turned on intensity and went from on to off with slider 3-13 for color, no visible change in color.

Try moving to 1/2 and repeating the same test.

Does your cable have only 1 headphone jack on it, or does it have 2?

Sent from my SM-G965U using Tapatalk