Results 1 to 5 of 5

Thread: Need more 24 VDC Accessory Ports

  1. #1
    Aquaphile
    Join Date
    Apr 2018
    Location
    California, USA
    Posts
    44

    Need more 24 VDC Accessory Ports

    My APEX 2016 and the EB832 currently reside inside a cabinet and are not visible so I have a display panel with a couple of LED indicator lights hooked up to my 24VDC Accessory ports to notify me at a quick glance that APEX doing its job, i.e. if it has turned on the chiller or the heater as an example. I really like how this looks and works so I am wanting to add more indicator lights to my panel and my question is can I add more accessory ports, and if so, how?

  2. #2
    NSI Member
    Join Date
    Mar 2017
    Location
    Wellington, NZ
    Posts
    83
    Adding an additional 1Link module would be the cheapest, but still expensive way of doing it. Will give you an addtional 2 24v ports and 3 1Link ports.

  3. #3
    Frequent Visitor
    Join Date
    Oct 2013
    Location
    Oxnard Ca
    Posts
    89
    Your only 2 options are to purchase the 1link module or another EB832. Both have their purposes. If you only need 24v ports then the 1link is the way to go. if you also need more outlets to control devices then the EB832 is your answer.

  4. #4
    Aquaphile
    Join Date
    Apr 2018
    Location
    California, USA
    Posts
    44
    Is there anyway to use a 1LINK port?

  5. #5
    Hydroponics Guy
    Join Date
    Jun 2018
    Location
    Las Vegas, NV
    Posts
    57
    Quote Originally Posted by MrT View Post
    Is there anyway to use a 1LINK port?
    Not officially. Please note that you can buy a 24v adapter from Neptune with the molex connector (pmup, solenoids, etc)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •