Nyos 160
does anyone have one with an apex fusion
can you tell me what you WATTS and VOLTS are in fusion
as mine is showing 55w and 0.7v
just wondering if this is correct
Sent from my SM-G950W using Tapatalk
Nyos 160
does anyone have one with an apex fusion
can you tell me what you WATTS and VOLTS are in fusion
as mine is showing 55w and 0.7v
just wondering if this is correct
Sent from my SM-G950W using Tapatalk
The Apex does not report Volts for an outlet. The Volts input shows the voltage being supplied to the EB832. You mean watts and amps.
I have a Nyos 120, not a 160 and it shows 28w / 0.3 Amps. Published rating is 8w, but I do not believe it. That will vary depending on how much air is allowed to be pulled in.
The pumps used appear to have a poor power factor, but if I can remember to do so, I might verify that with a Kill-A-Watt meter when I have a chance.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I have a Nyos 160. My EB832 is reporting 56w / 0.7 Amps, so yours appears to be correct.
thabks
I see on nyos website it 22 w
unless that is a new pump they have
Sent from my SM-G950W using Tapatalk
Bookmarks