So I have a solenoid controlling rodi Supply to my reservoir. It has an optical sensor at the 10 gal mark. I have it set so when the water drops below the solenoid opens and fills for 80mins which makes me about 12 gal of new water.
I use the same reservoir to supply my mixing brute container. I have a VO as watermaker to manually tigger the solenoid so I can fill it to the 40 gal mark. I have a float value as mechanical backup.
I wanted to see if I can use the VO to go longer than the 82 min max time I set on the solenoid. Here’s current programming.
Thanks!
Fallback OFF
Set OFF
If RODI_L OPEN Then ON
If Output Watermaker = ON Then ON
When On > 082:00 Then OFF
Defer 001:00 Then ON
Defer 000:04 Then OFF
Min Time 080:00 Then ON
Watermaker VO
I used to have it as just a switch so
Set Off
Wondering if I can use
Set ON
When on > 180:00 Then OFF
And just keep the outlet manually OFF.
Sent from my iPhone using Tapatalk
Bookmarks