I bought a DOS to automatically dose Fusion 1 and 2. I followed the startup guide and calibrated the pumps. I then went through steps in setting up each pump..asking me for amount/day (which is 10ml of each for my 125g. I chose Start at 00:00 and end as 23:59 for Fusion#1/Alk and since supposed to dose Fusion #2/Cal a few minutes later I chose 00:30 for start and 00:29 for end.
How much is it going to dose and how often with this small amount f setting...or does it turn really slow for 23:599 hours?
I guess it would better/ideal if it Alk dosed 1ml every hour (on the hour) for 10 hours and Cal dosed 1ml every hour (at 15 mark)...where/how can I do that?
Here is what code is now and does not look right
ALK
Fallback OFF
tdata 00:00:00,1,21,0,1,3,72,100,0,1,9,36,14,0
CAL
Fallback OFF
tdata 00:00:00,1,21,0,1,3,72,2,0,1,0,60,14,0
tdata 00:30:00,1,21,0,1,3,72,98,0,1,8,172,14,0
Bookmarks