I have an idea of using two PMUPs for doing a water change.
One pump would be placed in the sump and the other in the water reservoir. The pumps would cycle using the level sensors of the ATK to control each pump.
The process would start with the reservoir pump activating until the ATK high level sensor activated.
At this point the reservoir pump stops, a 5 second pause then the sump pump would start until the ATK low sensor opens.
At this point the sump pump stops a small pause again and then the reservoir pump would start.
This cycle would continue until the reservoir was empty.
So so all you APEX programming geniuses...
Help.
Bookmarks