Originally Posted by
isomorphic85
I've got the ATK setup but i'm confused in the programming.
currently my programming is as follows:
Fallback OFF
Set OFF
If ATO3_1 OPEN Then ON
If ATO3_2 CLOSED Then OFF
When On > 005:00 Then OFF
Defer 000:10 Then ON
Defer 000:04 Then OFF
Min Time 060:00 Then OFF
my confusion is that when ATO_1 is open the pump is not starting after 10 seconds, which i'm assuming is because of the Min Time 60?
so does the it mean that after ATO_1 is open it will wait 60 minutes before turning the pump on?
the PMUP outlet is set to the auto position.
thanks for any help understanding this.
Bookmarks