Trying to add my old eb8 to my apex fusion setup. I apologize but if the directions exist for fusion but I found some that required me to go to classic which I apparently cannot do. Any help would be appreciated.
Trying to add my old eb8 to my apex fusion setup. I apologize but if the directions exist for fusion but I found some that required me to go to classic which I apparently cannot do. Any help would be appreciated.
From another thread, it sounds like you got a new system. By Apex Fusion, do you mean an Apex 2016 or Apex EL? If so, adding an EB8 should be straightforward. Connect an Aquabus cable between the EB8 and the controller or another module (and plug its power cord into the wall of course.) Then reload the Apex Fusion webpage. The lock icon at the upper right should now be orange, which means there are new tiles (for the 8 energy bar outputs) in the hidden tiles area. Click on the icon and drag the tiles you want to use down onto the dash. Also go to the Modules page and update the EB8 firmware.
Bookmarks