The below statement is accepted into my fusion programming but not retained when uploaded / saved
If ATO_LO OPEN > 60:00 Then ON
It then gets changed to:
If ATO_LO OPEN Then OFF
All i want it to do is if the sensor remains open for more than 60mins as the pump has failed then turn on the backup system ..... I also want a failsafe for;
If ATO_LO CLOSED > 240:00 Then ON
So if the sensor has failed in the closed state for more than 4 hours then alarm ON or email ON
Ideally i want the alarm to be triggered and a different EB power plug to be turned on, for the backup system to start.
Rapidly running out of patience to be honest
Bookmarks