Hi
I want to istall my ghl stirring in breakout box,the ghl stirring is 24 v , can connect with the breakout box??
Hi
I want to istall my ghl stirring in breakout box,the ghl stirring is 24 v , can connect with the breakout box??
What exactly are you asking? What exactly do you want your break out box to detect?
The ghl stirring is feeding by 24 volts, can i coneect in breakout box and run ghl stirring?
Enviado do meu iPhone usando Tapatalk
No, the break out box doesn't supply voltage, nor is it designed to control it. Just so we're on the same page, is this what you're referring to?
Yes
Enviado do meu iPhone usando Tapatalk
Sorry i thin breakout box supply energy
Enviado do meu iPhone usando Tapatalk
The purpose of the break out box is to monitor a state of switches or sensors and alert the apex of the status. It can't do any work.
When breakout box is connect in apex , it can supply energy for other part
Enviado do meu iPhone usando Tapatalk
yes, the basic way it works is if you have a float switch in your skimmer cup and when the cup is full the float switch closes a contact and alerts the apex. With that information you can program outlets to turn on or off equipment, in this case you would use it to turn off the skimmer pump.
You need to have either an FMM or a 1link module to drive it with 24V directly. You could also use a 24V power supply and plug it into an energy bar.
The breakout box can't power anything. It is purely to read the status of dry contacts like float switches, door sensors, etc.
Sent from my SM-G965U using Tapatalk
Thanks guys, you are awesome
Enviado do meu iPhone usando Tapatalk
Bookmarks