Ok. I have 2 150w jeagar heaters in my sump. One is plugged into outlet 8 on my eb8, and the other heater 2 is plugged into outlet 4 on my eb4. The reason i put one on each power bar is because they are older models and wanted them plugged into proper outlets. So i did the programming with turning on at 77. 5 and off at 78.5. Heater one is off temp probe 1 and heater 2 is off a second temp probe for safety reasons. Everything worked fine last night and this morning according to the log but i just looked at my log and now my heater 1 is not working. Heater 2 has been on since 230 this afternoon trying to heat the tank. Why is the other heater not turning on? The bar is set to auto. I originally moved them to those respective outlets because was having same problem when plugged into outlet 4 and 8 on same bar. I am very frustrated as this should be simple and complicated as not doing any fancy programming. Used the apex task setup for them.
Bookmarks