So, I picked up a used mp40esW to use behind my rocks. The plan is to use this pump in 2 minute pulses. It has a brand new wet side.
I reset it. And connected to the apex via wxm. All good.
But my mp40 icon on fusion shows the mp40 but “battery on”.
My block has a solid green light when it’s off but when I turn it in, the block light is red and I have a flashing green light on the controller.
I have also disconnected the wxm, updates it and reattached it to the apex. No fix.
FWIW, it was doing this before even connecting to the apex.
Any advice as to what I need to do?
Sent from my iPhone using Tapatalk
Bookmarks