Month of the Year [MOY] Command

[Raul-7]

Why doesn't this command exist; will allow for different programs for different months of the year. For example, to simulate dry and wet season for those who use the Apex for breeding [ie. lower temperatures, more frequent WCs, lower lighting, etc.]?

Would be very helpful personally.

[zombie]

You might be able to use the season table to accomplish what you want. Please explain in detail what you want to accomplish.

Sent from my SM-G965U using Tapatalk

[Raul-7]

You might be able to use the season table to accomplish what you want. Please explain in detail what you want to accomplish.

Sent from my SM-G965U using Tapatalk

For example, Jan-Feb [dry season]
*Higher temps
*Longer light duration

These can be accomplished via seasonal table.

However, I'm interested in other factors like
*Decreased WC's [Instead of everyday to 2 times a week]
*Flow decreases [Gyre from 60% to 30%]


And vice versa during wet season.

[zombie]

I would advise against changing water changes based on season. It is better to have water quality be good and consistent.

The gyre flow modifications could be accomplished by relating flow ranges to either temperature or the time that lights turn on.

Ex say your season table ranges from 77 to 80 and you want highest flow at highest temps.

Gyre60
Set OFF
If Temp > 79.0 Then ON
Min time 005:00 Then ON

Gyre45
Set OFF
If Temp < 79.1 Then ON
If Temp < 78.0 Then OFF
Min Time 005:00 Then ON

Gyre30
Set OFF
If Temp < 78.1 Then ON
Min Time 005:00 Then ON


Use those states to trigger profiles or percentages.

Sent from my SM-G965U using Tapatalk