I have mine setup to be off on feed mode A, then restart 10 minutes later, feed mode is 5 minutes. My question is, is there a way to stop the ato from pumping water after start up?
Sent from my SM-G950U using Tapatalk
I have mine setup to be off on feed mode A, then restart 10 minutes later, feed mode is 5 minutes. My question is, is there a way to stop the ato from pumping water after start up?
Sent from my SM-G950U using Tapatalk
No. That is a quirk of the Tunze that can't be overwritten in any way.
Sent from my SM-G965U using Tapatalk
How are you using the FeedA cycle? What for? Unless whatever you are doing during FeedA causes the water level to go down, there's no need to suppress ATO.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
The Tunze comes with a second mount that you can use to move the float switch to a higher location in the sump so it doesn't sound the alarm when the water rises in feed mode eliminating the need to turn it off. The trade-off is if the Tunze optical sensor malfunctions then it could add more water up to the level of the float switch. That being said, you can set an alarm triggered by a drop in salinity to let you know there is a potential problem with the ATO. I have two Tunze 3155s on two separate tanks that have been flawless in two years of operation.
Bookmarks