Results 1 to 4 of 4

Thread: APEX display causing issues

  1. #1
    Regular Vistor
    Join Date
    Jun 2014
    Location
    Louisiana
    Posts
    34

    APEX display causing issues

    I use my manual display a lot more than I use fusion.

    Today I noticed my Apex classic display was froze when I tried to go to feed mode like I normally do. The display was there (can see the text and it was backlit) but no buttons would work. I unplugged the display then plugged it back in after 5 minutes. When plugged back in the display remained black (not backlit) and it the outlets would not respond through Apex Fusion and the EB8 and some other modules were blinking green. Unplugging the display and leaving it unplugged turned the EB8's solid green and I could access everything through the APEX again.

    Why would the display cause other auqubus connections to fail? Can my display be fixed?

  2. #2
    Frequent Visitor
    Join Date
    Feb 2013
    Location
    Texas
    Posts
    209

    APEX display causing issues

    I would delete the module from fusion or the local web page, disconnect the module, re-attach and then update the firmware. You may need to do this several times.

  3. #3
    Regular Vistor
    Join Date
    Jun 2014
    Location
    Louisiana
    Posts
    34
    I'm not knowledgeable on where to delete the module from fusion.

    I've also seen people say local webpage before as well and don't know what that is. Is that the APEX fusion page?

    As far as updates the last time I did that it became an all weekend affair and shut down my entire system. Are you talking about updating only the display. I am running 4.53 on the entire system right now. Hopefully you are referring to just updating the display itself.

  4. #4
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    If the display is black there is probably a short in it. Contact support. It likely needs repair or replacement.

    Sent from my SM-G965U using Tapatalk

Similar Threads

  1. Apex display issues
    By JurisHP in forum Misc Apex Usage & Programming
    Replies: 3
    Last Post: 07-24-2019, 09:18
  2. Apex Classic Display Module Issues
    By ajkaiser in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 5
    Last Post: 03-11-2018, 07:29
  3. EB8 causing issues on system
    By oseymour in forum EnergyBars 832 / 632 / 8 / 6 / 4
    Replies: 0
    Last Post: 05-26-2016, 11:28
  4. Help! Display causing Apex to freeze?
    By Grendel in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 1
    Last Post: 10-10-2015, 22:19
  5. Question: Posting for a fellow Apex owner....Display Module Issues
    By randoreefer in forum Apex Classic/Apex Lite/Apex Jr
    Replies: 0
    Last Post: 04-02-2014, 04:18

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •