I'm trying to set up my BRS dosing pumps to dose alk. for 1 minute on the top of the hour and the other to dose calcium for 1 minute on the bottom of the hour. Presently have alk. pump on outlet 1, icon as clock, and control type as Powerhead. Configured as fallback off, Initial off time 000:00, On time 001:00, and Off time 059:00. Calcium pump in on outlet 2, icon as Light B, control type as Powerhead. Configured as Fallback off, Initial Off Time 030:00, On Time 001:00, Off Time 059:00. Both pumps come on and run for 30 seconds on the top of the hour and the calcium pump comes on for 30 seconds on the bottom of the hour. I don't understand what is wrong with the programing. Any help would be greatly appreciated. Thanks.
Bookmarks