How do I fix this ? just set up and learning.
2018-12-18 20:01:45 -0500 ON If ORP < 200 Then ON (151)
If ORP < 200 Then ON (151)
How do I fix this ? just set up and learning.
2018-12-18 20:01:45 -0500 ON If ORP < 200 Then ON (151)
If ORP < 200 Then ON (151)
Go to the inputs tab and either adjust the ORP alarm level or disable the alarm if you don't want it at all.
Sent from my SM-G965U using Tapatalk
AlarmUse recommended values: I just unchecked it as it was set at 200 and mine is at 154 is that right and I have just started reading and it should come up after time? really don't know need to learn any help would be appreciated thx Phil
The ORP reading will most likely gradually increase over the next several days as the probe “breaks in”. After it levels off you can then set and adjust the alarm values as desired.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I have a very similar problem I notice he went to the inputs to correct it but I can’t find the inputs
- - - Updated - - -
My messages is (If Output RetPump_2_3 Amps < 2.3 Then ON) 20 times a day
Thank you very much for your quick reply. It works perfectly now with no alarms. And also thank you for all your replies on all the other questions other people of had it’s really help me set up all my programming.
Bookmarks