I've asked this several times previously but the various codes have always failed or missed in one way or another as it relates to alarms because of the limitations, more potential for errors, etc.
So I changed my overall alarm system to sound every 5min, tricking an alarm to sound more than intended hasn't consistently worked. I thought tricking it to pause might be easier.
The goal of this alert (full skimmer) is to have a single virtual outlet which says 'hey that switch is open (on) let's turn on (virtual outlet) but then shut off after 1min and then turn back on 8hrs later for 1min. Additionally ignore anything happening in the night'.
I envision something not unlike a dosing program that turns on below a pH but then only runs in intervals until it's risen to a higher pH and can't run during evening hours.
The pit falls I've ran into seem to be that the alarm either won't sound during the day if triggered at night, won't shut off as intended, and/or won't repeat.
*I do not want to play the game of multiple virtual outlets playing tag. It's very confusing and cluttered.
Thanks for the patience and help!
Bookmarks