I have three Kessil 360's. They each have their own outlets.
Led Left Outlet 1
Led Middle Outlet 2
Led Right Outlet 3
They're all on the same schedule.
However, when I set the LED Right to Auto, the outlet isn't turning on. It will manually let me turn on, but isn't following the schedule.
Thoughts?
On a different note, I discovered something else about daisy chaining the Kessils. The left is the last in the chain, the middle is the middle, and the right is the primary where chain starts and the cable connects to the apex. If I turn the left led outlet off, the left goes out and the middle and right stay on. If I turn the middle off, the middle and the left go out and the right stays on. If I turn the right off, which is what it's doing now on it's own, they're all off. Weird. I would have thought they'd at least power up, but just not talk to the apex anymore...
UPDATE: I just turned the left led off, put it back to auto, and now that's not coming by the right one that is set to auto is on now. Is there some sort of safety device that delays turning the outlet back on in auto mode after you've shut it off and turned it back to auto?
Bookmarks