Using new apex controller
I set FeedD time at 060. When D is activated the timer starts counting down from 4:59 rather than 59:59?
This worked properly with my old classic.
FEEDER
OSC 000:00/000:30/000:30 Then ON
If Time 00:00 to 15:00 Then OFF
If Time 15:02 to 00:00 Then OFF
If FeedA 000 Then ON
If FeedD 060 Then OFF
Cor 20
If FeedA 000 Then 3
If FeedD 060 Then OFF
If LEAK CLOSED Then OFF
If SOCK CLOSED Then OFF
Do I need FeedD 060 in both outlets?
Note: There is no feeder physicals plugged in.
I dropped it and it quit. I don’t think it’s relevant here.
Bookmarks