Results 1 to 5 of 5

Thread: Need your help

  1. #1
    New User
    Join Date
    Nov 2015
    Location
    San Diego, CA
    Posts
    3

    Need your help

    Greetings fellow reefers. Please take a look before I glue this manifold and let me know if I'm way off or on target. Thank you.

    Cor20 Manifold with 3 outlets and main return, fluid monitoring on each, ball valves after fm.

    IMG_2236.jpg

  2. #2
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Are you sure the lowest 1/2" sensor wont be submerged when you turn the COR off?

    Is your intent to get flow to tank or total COR flow. If the former, you have them arranged in the right order.

    Sent from my SM-G965U using Tapatalk

  3. #3
    Frequent Visitor
    Join Date
    Sep 2013
    Location
    Rhode Island
    Posts
    146
    I'm curious where you got the tee fittings the 1/2" sensors are connected to? I thought the sensors used BSPT not NPT?

  4. #4
    Frequent Contributor zombie's Avatar
    Join Date
    Dec 2013
    Location
    Denver, CO
    Posts
    13,176
    Quote Originally Posted by stre1026 View Post
    I'm curious where you got the tee fittings the 1/2" sensors are connected to? I thought the sensors used BSPT not NPT?
    You can make it work if you fill the gaps with silicon when you thread it.

    Sent from my SM-G965U using Tapatalk

  5. #5
    Frequent Visitor
    Join Date
    Sep 2013
    Location
    Rhode Island
    Posts
    146
    Quote Originally Posted by zombie View Post
    You can make it work if you fill the gaps with silicon when you thread it.

    Sent from my SM-G965U using Tapatalk
    Thought that's what he may have done.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •