Can someone help me
I have apex local up on my mac and I have my apex base unit hooked to my router with a cat 6 cable and I need to put the new wifi info in as my cable co put a new one in todat and I have to update but cant get it
Phil
Can someone help me
I have apex local up on my mac and I have my apex base unit hooked to my router with a cat 6 cable and I need to put the new wifi info in as my cable co put a new one in todat and I have to update but cant get it
Phil
There are two ways you can do it...
1. Disconnect the Ethernet cable. If the Apex LED turns blue shortly thereafter, use the initial Wi-Fi setup procedure in the Get Started Guide ( https://www.neptunesystems.com/apex-wifi-2/ ). If the LED stays orange, reset the Wi-Fi settings by pressing the reset button for about 6 seconds, until the LED panel turns blue. Then use the aforementioned Wi-Fi setup procedure.
2. While the Apex is Ethernet-connected, go to the Network Setup page. Click the Configuration tab. For the Type field, select Wi-Fi. Enter the SSID (wireless network name) and password/pre-shared key in the fields at the bottom of the box. Click the orange Update Apex button. The Apex will restart in several seconds. While it is restarting, disconnect the Ethernet cable.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
what do i do about this?
AOS UpdateCannot connect to the server. Please recheck network connection.
Current AOS5.04_7A18
I only have internet with my modem hardwired to my Mac right now is there any way I can regain control of my aquarium? I will get a new router in the morning
Bookmarks