-
Frequent Visitor
Need Help
I cannot get the DDR to pull any liquid (cal, alk, salt water, R/O water, etc). I have 2 DOS and I have tried both with no luck. I have replaced the fittings with John Guest fittings, no luck. I have tried both the tubing the Neptune gives you and regular tubing, no luck. I have tried to stick the tubing directly into the cylinder that holds the liquid, no luck.
The heads are physical working, but I am so frustrated I cannot get this to work. I have $500 invested in some equipment that is sitting there designed to replace my manual dosing, and I am still manually dosing.
HELP!
Sent from my SM-G965U using Tapatalk
-
If you stick it directly in the DDR and it isn't pulling anything, I can almost guarantee you didnt seat the tubing on the DOS heads far and/or tight enough. You want the fittings as tight as you can get by hand and the tubing needs to be pushed tight to the end as you are tightening it.
Sent from my SM-G965U using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks