I have Apex Classic. I have two Stream 3s and I want them to alternate ON/OFF. I created two profiles - WaveLeft and WaveRight. I have one Stream 3 set to WaveLeft and the other WaveRight. When I look at the commands being sent to the pumps using the local intranet page, it appears to work. Left pump is on at 85% for 10 seconds then it switches to the right being on for 10 seconds at 85%. The problem is that neither pump turns OFF when it supposed to be OFF. Both pumps are running at some percentage (I assume 85%).
I know the cable are working because I can turn the pumps on and off. I can also adjust the speed using the slider. Its only the profile program that seems to be the issue.
Anyone encounter this issue?
WaveLeft (PF9)
Synchronize - Off
Divide by 10 - Off
Initial off time - 0
On Time - 10
Off Time - 10
Min - 0
Max - 85
WaveRight (PF10)
Synchronize - ON
Divide by 10 - Off
Initial off time - 0
On Time - 10
Off Time - 10
Min - 0
Max - 85
Bookmarks