Every time I use feed mode B i get text and email alerts, what is wrong with my code?
Fallback OFF
Set ON
If FeedA 015 Then OFF
If FeedB 005 Then OFF
Thanks
Rich
Every time I use feed mode B i get text and email alerts, what is wrong with my code?
Fallback OFF
Set ON
If FeedA 015 Then OFF
If FeedB 005 Then OFF
Thanks
Rich
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
My Bad
Set OFF
If Tmp > 82.5 Then ON
If Tmp < 75.0 Then ON
If Sys_pH < 7.40 Then ON
If Output Skimmer_3_6 = OFF Then OFF
If Sump_H OPEN Then ON
If Power EB8_4 Off 000 Then ON
If Power Apex Off 000 Then ON
You need to remove the skimmer line, and the switch line. Create a VO and then do this
HighSump (VO)
Set OFF
If Sump_H OPEN Then ON
If Output ReturnName = OFF Then OFF
Defer 005:00 Then ON
Set OFF
If Tmp > 82.5 Then ON
If Tmp < 75.0 Then ON
If Sys_pH < 7.40 Then ON
If Output HighSump = ON Then ON
If Power EB8_4 Off 000 Then ON
If Power Apex Off 000 Then ON
In addition, the power lines serve you no purpose if you dont have a UPS on this apex.
Sent from my SM-G965U using Tapatalk
Thanks Zombie, one question. What is this line for ......If Output ReturnName = OFF Then OFF ?
I do have a UPS on the apex
rich
Ok, I don't have the return pump on the Apex, so I just deleted that line.
Thank you
zombie
Now I am getting this alert:
Date: 2019-02-19 09:25:16 -0500
Status: ON
Statement: Set OFF
Here is my Email code:
If Tmp > 82.5 Then ON
If Tmp < 75.0 Then ON
If Sys_pH < 7.40 Then ON
If Output HighSump = ON Then ON
If Power EB8_4 Off 000 Then ON
If Power Apex Off 000 Then ON
and VO
Set OFF
If Sump_H OPEN Then ON
Defer 005:30 Then ON
What did i do wrong?
Thanks
Rich
Status ON / Set OFF usually is because the slider for the email output is in the manual ON position, forcing the alarm to always be on. Put the slider in the AUTO position.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Also, you are missing the required Set OFF statement. Add Set OFF as the first line of the email output program.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks Russ, I missed that.
I am still getting the text and email alert, here is my code, what am I missing?
Date: 2019-02-21 21:13:41 -0500
Status: ON
Statement: If Output HighSump = ON Then ON
Set OFF
If Tmp > 82.5 Then ON
If Tmp < 75.0 Then ON
If Sys_pH < 7.40 Then ON
If Output HighSump = ON Then ON
If Power EB8_4 Off 000 Then ON
If Power Apex Off 000 Then ON
VO
Set OFF
If Sump_H OPEN Then ON
Defer 005:00 Then ON
Thanks
The Defer in the VO needs to be a bit longer than the length of time the pump is OFF.
You have If FeedB 005 Then OFF in the return pump program so the Defer needs to be the duration of the Feed B Interval + the 5 extra minutes in the FeedB statement + at least one more minute.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Bookmarks