Light Fixture Varspd (4) VDM (3) AWM
(2)
WXM (2)
Any 0-10vdc dimming capable (1)
X
AI Hydra series
X
AI Vega
X
Ecotech Radion series
X
AI Sol
X
AI Acan PA600/800
X
Kessil A160 & 360W (6)
X
Apollo ReefLED Solarblast
X
Orphek PR72/DIF100
X
ReefSpectrum P47
X
BuildMyLED
X
Onyx RapidLED
X
Mean Well ELN-30/60 (5)
X
Zetlight Q-Maven
X



(1) - Fixture must be able to accept a 0-10vdc dimming signal. Fixtures with a manual knob to control dimming are not compatible. Fixtures with PWM dimming are not compatible without a conversion card (see Steve's LEDs). Typically there will be + and - terminals marked 'dimming' or 'dim' on the fixture.
(2) - Requires Apex firmware 4.30 or above.
(3) - Via the VDM serial connection.
(4) - Any fixture listed as compatible with VarSpd outlets will also work on the VDM VarSpd outlets. VarSpd outlets are available on the full Apex as well as the VDM module (which can be added to a Jr. or Lite system).
(5) - These are LED drivers only - requires DIY wiring and compatible LED's. See Steve'sLED's or RapidLED for two such sources and there are others.
(6) - Requires 2 VarSpd outlets - one for intensity and the other for spectrum/color.