Results 1 to 15 of 15

Thread: Apex, WXM, and Radion Issues - Read this thread

  1. #1
    Frequent Contributor
    Join Date
    Jan 2013
    Location
    Gilroy, CA
    Posts
    1,043

    Apex, WXM, and Radion Issues - Read this thread


  2. #2
    Regular Vistor
    Join Date
    Feb 2015
    Location
    Sanford,FL
    Posts
    46
    This thread is really old and I need to know if any recent problems have been reported. I haven't been successful inn connecting my radions to apex.

  3. #3
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    +2 for the above ...Just bought the WXM Module I did the firmware upgrade to my Apex.
    After following the links it takes you to here:
    http://www.neptunesystems.com/radiongs/
    Following this direction cannot reset Radion light to WXM moduel ( won't turn of and on )!
    I'm at the 4.10 mark on the video.

  4. #4
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Quote Originally Posted by trimixdiver View Post
    +2 for the above ...Just bought the WXM Module I did the firmware upgrade to my Apex.
    After following the links it takes you to here:
    http://www.neptunesystems.com/radiongs/
    Following this direction cannot reset Radion light to WXM moduel !
    I'm at the 4.10 mark on the video.
    Sometime Radion are temperamental , try to reset them to factory specs using ESL and they should attach easily after .
    Alain

  5. #5
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    Quote Originally Posted by Alain B View Post
    Sometime Radion are temperamental , try to reset them to factory specs using ESL and they should attach easily after .
    ESL where is that ...on fusion ?

  6. #6
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    ESL is the Ecotech way to program radions , have a look to your radions instructions manual .
    Alain

  7. #7
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    Quote Originally Posted by Alain B View Post
    ESL is the Ecotech way to program radions , have a look to your radions instructions manual .
    Can it be done here at the bottom reset Radion?
    https://www.dropbox.com/s/lhw370ndit...pture.PNG?dl=0

  8. #8
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Yes normally it can be done from there , you should re-read my post #4 .
    Alain

  9. #9
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    OK got them showing on my Fusion , but both lights showing they are missing on dashboard..
    Now showing 99% on both light after unplug/plug WXM from apex.

  10. #10
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    Have you tried to operate the outlet ON-OFF and check the result ?
    Alain

  11. #11
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    Quote Originally Posted by Alain B View Post
    Have you tried to operate the outlet ON-OFF and check the result ?
    Alain if you mean if I have slide from Off-Auto-On to Off/On then yes they do go off and on.

  12. #12
    Frequent Contributor Alain B's Avatar
    Join Date
    Mar 2013
    Location
    Montreal, Canada
    Posts
    2,568
    So if you can turn them ON-OFF they are connected , you can program them .
    Alain

  13. #13
    Frequent Visitor trimixdiver's Avatar
    Join Date
    Jan 2014
    Location
    Brisbane Australia
    Posts
    184
    Thanks will do been looking at some of these programs.
    https://forum.neptunesystems.com/sho...n-FUSION/page3
    I'm lost , not sure what to use!
    ps I don't have a Par meter.

  14. #14
    New User Blackbeltmom's Avatar
    Join Date
    Jan 2014
    Location
    Charlotte, NC
    Posts
    8
    I am trying two new Radions to my Apex. I went it to update the WXM first and it is not showing in my list of modules, but yet my two existing Radions are working. When I go into configure modules, it says the WXM is there and I tried updating it and the apex says that it is now updated. When I run the Ecotech update, I get the 6fe error. When I try to attach Radions, nothing happens. When I was trying this, it turned the two new Radions off and they never came back on.
    I also don't see the page in Fusion where I attached the Radions.

  15. #15
    Frequent Visitor
    Join Date
    Nov 2013
    Location
    Mississauga,Canada
    Posts
    93
    Hey guys i have 3 xr30 pro radions on my system. i am having issues with 2 of my Radions showing as "missing" AFTER they were added couple of days ago using WXM and working smoothly on fusion. Yesterday i added my 2 Vortech pumps on WXM and that is the only change i did. However my 3rd radion shows OK on the WXM configuration page under my controller web interface. Can someone help get the other two back on fusion. Thanks.

Similar Threads

  1. Radion missing (read first)
    By sisterlimonpot in forum Apex Programming for Lighting
    Replies: 10
    Last Post: 12-02-2018, 05:40
  2. Read This First! New APEX Users: Read This Thread!
    By RussM in forum Info For New APEX Owners
    Replies: 15
    Last Post: 03-05-2017, 09:32
  3. Help! Radion Apex connection issues!
    By Relientkiid in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 2
    Last Post: 02-11-2016, 07:44
  4. WXM + radion pro g3. Led calibration and sync issues.
    By chronzz in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 2
    Last Post: 02-02-2016, 10:06
  5. WXM issues - Vortechs work but Radion has a ghost
    By Reefer_Madness in forum AquaBus Modules, Probes, and Breakout Boxes
    Replies: 4
    Last Post: 07-18-2015, 16:20

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •