I'm playing around with this now and getting the same trouble with on/off patterns not going as expected. Apex Lite, if that matters.
Var4_1_6055R
If Time 09:00 to 12:00 Then 6055_WaveR
Var4_2_6055L
If Time 09:00 to 12:00 Then 6055_WaveL
ID: 13
Name: 6055_WaveR
Synchronize: Enable
Divide by 10: Enable
Initial Off Time: 0 seconds
On Time: 10 seconds
Off Time: 10 seconds
Minimum Intensity: 0%
Maximum Intensity: 100%
ID: 14
Name: 6055_WaveL
Synchronize: Enable
Divide by 10: Enable
Initial Off Time: 10 seconds
On Time: 10 seconds
Off Time: 10 seconds
Minimum Intensity: 0%
Maximum Intensity: 100%
The pattern for 'on' I get is Right, Left, Right, Both, Right, Left, Right, Both, etc.
Obviously that doesn't result in much wave action.
Ideas?
Last edited by don_chuwish; 02-12-2018 at 15:16. Reason: mispost
don_chuwish
Southern Oregon
Should be 10 10 0 in wave left. You have 10 10 10
You might be an engineer if...You have no life and can prove it mathematically.
What periodicity do you want? You have 10 seconds for on/off time but have divide by 10 enabled, so the result is 1s of on/off time. If you want 10 seconds, disable divide by 10 in both profiles. Use diverse by 10 only for sub-second cycling.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks, I had wondered about that but somehow the logic just didn't work in my head. Working like a charm now!
Good point. I'd been playing with <1s to see if that got the correct resonance frequency for my tank. But now that I have it actually working I think 1 second might be just about right.
Coral is dancing!
don_chuwish
Southern Oregon
Bookmarks