That is the question. I have a pair of Jebaos WP40 and a DC 6000 as return.
Can I control them on the AC3?
Thanks !
That is the question. I have a pair of Jebaos WP40 and a DC 6000 as return.
Can I control them on the AC3?
Thanks !
Maybe with an aqua surf
Sent from my iPad using Tapatalk HD
No. They are not wireless. Do I need to change the controller of the Jebaos or adapt it?
Aqua surf isn't wireless it is the older version of the Vsp module
Sent from my iPad using Tapatalk HD
It can be, but is it compatible? How can I know?
The aquasurf can control them. Take a look at torx diy jebao cable thread. It should work exactly the same as that, but it is possible the pinout is different. The jebao controller is not used at all.
You might be an engineer if...You have no life and can PROVE it mathematically.
Thank you Zombie, how many pumps can I control with the aquasurf? I fount the topic:
http://www.reefcentral.com/forums/sh....php?t=2381275
As I can see, it is for 2 pumps, but the aquasurf can control more that that?
Thanks !
You can control 4 per aquasurf. You just have to make two double cables.
You might be an engineer if...You have no life and can PROVE it mathematically.
Great zombie, I saw that. Really appreciate your support.
Sorry to ask this, but How can I be sure the pinout is the same for the Aquasurf? Torx cable is the smae pinout?
It should be, but you can always check with a voltmeter before you solder up the cable. Turn only V1 on and verify that you see 10V DC on the two colors of the ethernet cable that TORX suggests to use. If those colors dont show 10V, then play trial and error until you find the two that do. Repeat the same process for V2.
You might be an engineer if...You have no life and can PROVE it mathematically.
The pinout is the same. The Neptune Stream cable hasn't changed from the pre-Apex days - it's part number is still SURFCAB2. The "SURF" part comes from when it could only be used with the AquaSurf.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Thanks for the info Russ, Zombie !! Can 2 aquasurfs be conected to the controller to control 8 pumps?
Yes. You just need to assign unique CTRL addresses to the 2nd AquaSurf
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Got the aqua surf´s for my AC3, but don´t understand how to configure them
I alredy saw the manual and I can see hot the configure the intensity with
Pmp Int 35/100 para PF1
But don´t understand about SD, sd, Sd, sD and about the times on and off and how to identify wich pump correspond to each code.
Can you give me some help pls?
Thanks in advance !
That's covered in the AquaSurf manual.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Have it on hand, but don´t understand
Think I got it.
Will open another thread to help on review my code.
Thanks
Quick question, If I use Torx cable to control the Jebao pumps, do I need to use a powersupply on the Aquasurf?
The AquaSurf requires its own power supply unless you are controlling Tunze pumps.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
In this case, the powersupply of the Jebao, does not send power to the aquasurf and this one needs it´s own powersupply? If this is correct, wich power supply I need to use it?
Thanks !
Nobody?
It takes the power supply for the Aquasurf. I think it is a 12v 500mA. Nothing fancy and can probably be picked up at a local radio shack. The Aquasurf needs power and the Jebao pumps need their power as well.
Current: 120 Gallon Peninsula DIY system.
Bookmarks