Send Failed
//Error: line 3 - Expected ON or OFF OR PFx // If Time 07:00 to 08:00 Then RampUpm //Error: line 4 - Expected ON or OFF OR PFx // If Time 08:00 to 12:00 Then Leftn //Error: line 5 - Expected ON or OFF OR PFx // If Time 12:00 to 18:00
Send Failed
//Error: line 3 - Expected ON or OFF OR PFx // If Time 07:00 to 08:00 Then RampUpm //Error: line 4 - Expected ON or OFF OR PFx // If Time 08:00 to 12:00 Then Leftn //Error: line 5 - Expected ON or OFF OR PFx // If Time 12:00 to 18:00
Please screenshot the profiles page so we can see what all of them are called and copy/past the code that is giving you an error message. I can almost guarantee you there is a typo that you just arent noticing.
You might be an engineer if...You have no life and can PROVE it mathematically.
ID Name Type 1 Left pump 2 Right pump 3 RampUp ramp 4 RampDn ramp 5 Long_L pump 6 Long_R pump 7 Dusk_R pump 8 Dusk_L pump 9 Surge_R pump 10 Surge_L pump 11 Calm pump 12 PF12 pump 13 PF13 pump 14 PF14 pump 15 PF15 pump 16 PF16 pump 17 PF17 pump 18 PF18 pump 19 PF19 pump 20 PF20 pump 21 PF21 pump 22 PF22 pump 23 PF23 pump 24 PF24 pump 25 PF25 pump 26 PF26 pump 27 PF27 pump 28 PF28 pump 29 PF29 pump 30 PF30 pump 31 PF31 pump 32 PF32 pump
<p class="lead text-center">To use this site, your web browser must have JavaScript enabled.</p><p class="lead text-center">Please read these<a href="http://www.enable-javascript.com/" target="_blank"> instructions to enable JavaScript in your web browser.</a></p>© 2013 - 2014 Neptune Systems. All rights reserved.
Already found one problem. Your error message says you typed in RampUpm and it should be typed RampUp
The other problem is your profile is called Left but you are calling for Leftn in the code.
You might be an engineer if...You have no life and can PROVE it mathematically.
but Im not
I saw that also
its not named that way
I am matching everything that I can see
- - - Updated - - -
also
thanks for the help!
Type it in manually instead of copy/paste. You have stray control characters.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
nope
cant get rid of the m at the end
Try deleting the code and manually typing the entire code. If it still gives you problems after this, there is something corrupt in your config.
You might be an engineer if...You have no life and can PROVE it mathematically.
ok
I had to copy and paste the problem line first then upload it
then paste everything else
strange
but thanks so much for the help
Hi, I copied your programme for my tank as a first attempt, the part I'm unsure about is what do you mean by 'fallback on'? I have had no errors but if I leave the slide switch on auto it just pulses the 2 pumps and if I slide it to on it just puts them both on at 100%. Am I missing something? Cheers for any help
I stand corrected it all seems to be working beautifully . Still not sure what you mean by fallback though?
Well I thought it was working. Fusion is running the programme as it should but my pumps just sit there pulsing together for a few seconds at a time. Can anyone help?
If you are usijg a VDM, then fallback ON means run the pump at 100% if it loses communication with the base unit. If you are using the built in varspd ports, then fallback does nothing and can honestly be removed.
As far as unexpected behavior, I cannot do anything to help without seeing your code and profiles for both pumps and the time that you checked it.
There's a sticky about Fallback - it's also covered in the Comprehensive Reference Manual.
http://forum.neptunesystems.com/showpost.php?p=56241
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
I just wanted to post to say thank you for posting this program. I have installed the Jabeo to Apex adaptor last night and using your code I had everything running within 10 minutes. I am only running one WP-40 so I am only using the programming you posted for your left wavemaker.
Is the Defer statement necessary and does it delay the pumps from going on for 3 minutes
Just want to say that I borrowed from your programs and it's giving me a great place to start and mess around!
Thanks!
I followed your directions to the letter and found out that copy/paste kept throwing errors like everyone was saying... after typing in Manually on the code to was successful!! thank you very much for the help... However i do have one question on the code... what statement to you use for feed A button pushed to stop for 5 min and then resume program?
Ok I havent yet figured out how to do this through Fusion. you have to log into you apex Aquacontoller, then click on Configurations, then Misc setup, there you will see feed intervals A-D the time is in minutes so if you put a 1 in feed A your tank will be fed for 1 min, or better said anything you have programmed to shut down for feed A will shut down for 1 min the come back on.
Apex Misc Setup
Alarm sound Furelise Turkey March Minuet Solveigs Siren 1 Siren 2 Whistle Tonescale Positive Bee Negative Bee Disaster Bee Positive Act None Warning sound Furelise Turkey March Minuet Solveigs Siren 1 Siren 2 Whistle Tonescale Positive Bee Negative Bee Disaster Bee Positive Act None Datalog interval Feed interval A (M) Feed interval B (M) Feed interval C (M) Feed interval D (M) Power monitor enable Enabled Disabled Power log reset Reboot system after update Initialize memory None Initialize All Initialize AquaBus Devices Initialize Outlets Initialize Profiles
You can't do that in Apex Fusion - only in the Classic Dashboard as you described or using the display module menu.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
this is the code I use for my return pump.
Fallback ON
Set ON
If Outlet V-Feed = ON Then OFF
Defer 005:00 Then ON
If ALD1 CLOSED Then OFF
If FeedA 000 Then OFF
If FeedB 000 Then OFF
If FeedC 000 Then OFF
If FeedD 000 Then OFF
Now you will see If FeedA 000 Then OFF, so when I hit feed A my pump turns off for the amount of time Feed a is set, but i added the Defer 005:00 Then ON, which means after the time i set for feed A runs out my pump will stay off another 5 mins then come back on allowing my tank to feed longer, I also defer my skimmer 15 mins after every feeding and my varsp pumps. hope this helps sorry i didn't reply i am only on here when I have an issue or something new to share.
good luck.
20150528_211444.jpg
This is the Tank now as you can see I am no longer doing fish only, I needed color.
Thanks Gerry0625!! I did figure it out tested and works...
Bookmarks