Hummm.
Change the aquabus cable? you changed the ports both on APEX and in the powerbar?
Or perhaps you have a defect power bar?
VarSpd is the 0-10V variable speed ports
The rest is mail alarm and warnings/sound
Hummm.
Change the aquabus cable? you changed the ports both on APEX and in the powerbar?
Or perhaps you have a defect power bar?
VarSpd is the 0-10V variable speed ports
The rest is mail alarm and warnings/sound
So they were working right?
What have you done for them to stop working?
Or they never worked?
Started by getting my cam to work that took me sometime....after that
It the meantime I think you don't have any programing done yet. Right?
is so you can go to the APEX page (http://apex/) and to a full reset: System->Init memory->All
I can still hear the relay clicking...
where is the full reset...(http://apex/) not under configuration
Sorry.
Misc setup.
Or just go to display and System->Init memory->All
ok now getting some where...
I have #3 oulet working only here is some pics...
Untitled.png
On the Outputs page, you should now see 13 outlets listed - the 4 VarSpd, 3 alarm, and 6 EnergyBar outlets. Do you see these?
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
can you show the pictures of the outlet setup from the classical dashboard?
yes I do...ppp.png
- - - Updated - - -
Done pic supplied
That's not Outlet #3. The 3 in "EB6_3" you see is the AquaBus address of the module.
The EB outlets will appear on the dashboards, the Fusion Outputs page, and the Configuration->Outlet setup page in the classic web pages.
Each EB outlet has a default name like Light_3_1 or Pump_3_4. The Light, Pump, Heater, etc part of the default name is just the predefined function of that outlet. You do not have to use an outlet for that predefined role. You can use the outlets any way suitable. The middle number is the Aquabus address of the EB, which is really only of interest if you have multiple EnergyBars. The last digit is the outlet number on that EB.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
hhhh.png
So what you are saying is the circle ones are the 6 outlets is this correct ?
I think he meant he only enable outlet 3 for the testing.
Wonderful Trimix ... now you can enjoy your APEX ...
please take some time to read the comprehensive manual. In no time you will be programming everything
Yes, those are your EB outlets.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Rui Manuel Gaspar I now have teamviewer...
See the values in parentheses? Those are the internal system names of the outlets and won't change. The same values show up in the Device Name column on the Fusion Outputs page. So, even if you rename outlets with your custom names as desired, you can always use that device name value to identify the outlet by module number and outlet number.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
RussM is there anything you can do to help with my outlets, what is happening now had #3 outlet going but now have #4 outlet going also I hear the relay click on and of...
Whats going on boys.
You need to give more detail about what you are trying to do and what your challenge is.
Please do not send me PMs with technical questions or requesting assistance - use the forums for Apex help. PM me ONLY if the matter is of a private or personal nature. Thanks.
Bookmarks