Hi all,
Need some help with programming. I have chronic low ph so decided to buy kalk reactor. Im going to have it dose based on DT ph... I have two physical outlets i need programming.... they are
KalkDose_7_3 - this outlet will turn on pump hooked straight to my rodi and dose to sump
KalkStir_7_4 - this outlet will stir 15 minutes every four hours
i really dont know how to set this up but what i have so far
KalkDose_7_3
Fallback OFF
Set OFF
If DTpH > 8.25 Then OFF
If DTpH < 8.15 Then ON
KalkStir_7_4
Fallback OFF
Set OFF
then i have no idea.........
any help or suggestions would be great. thanks
Bookmarks